Tork Craft | 4 Flute Wood Boring Bit 24mm Type_Wood Turning combination stones are made with

combination stones are made with one face of coarse and one face of fine grit

The drill spurs have 4 cutting edges that leave a cleaner and more precise bored hole

Colourless

WORX 750W SDS Rotary Hammer Drill

The Kreg Jig® K4 includes one Wood-Chip Relief Hole for every Drill Guide Hole to keep the drill bit clear of excess wood chips

Tork Craft | 4 Flute Wood Boring Bit 24mm Type_Wood Turning combination stones are made withDiameter: 24,0mmOverall length: 165mmShank: 6,35mm hex for quick change Use the 4 flute boring bit to drill into wood timber. A low rpm rotary drill with a planetary gearbox is required to be used with boring bits. It is possible to use a cordless drill, but in its lowest gear. The drill spurs have 4 cutting edges that leaves a cleaner and more precise bored hole Using the same designed screw tip as from an auger drill bit the 4 flute boring bit feeds