Dremel | Carbon Brushes 2615298790 (FD 508) Cordless_Power Tool Water-based formulation

Water-based formulation

use with a drill press

Edge Slider for the 9401 Sander

Reversing and Built-In Job Light

top surface quality and a healthy working environment

Dremel | Carbon Brushes 2615298790 (FD 508) Cordless_Power Tool Water-based formulationCarbon Brush set FD 508 The motor brushes in your Dremel tool will wear down with normal use so they should be checked every 50 hours or so To check them unplug the tool and unscrew ('lefty loosey') the brush caps with a small flat head screwdriver The carbon brushes are held in with springs which should come out easily or with careful prying with the screwdriver if needed If either of the carbon brushes are less than 3. 5mm long they should both be