Tork Craft | Chassis Screw Sheet Metal Punch 32mm Cordless_Drill CE EN 352-1 ( H=28db

CE EN 352-1 ( H=28db

especially for curve cuts

and chiselling effortlessly in concrete

payload 25kg Outside length 444mm Outside width 329

1/4"M X 1/4"F 51mm Extension

Tork Craft | Chassis Screw Sheet Metal Punch 32mm Cordless_Drill CE EN 352-1 ( H=28dbSheet Metal Punch The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a hole through sheet metal. It is a very simple tool that consists of a punch, die and screw. To set up the punch, first drill a pilot hole into a piece of sheet metal with a step drill bit, place the die over the draw stud before inserting the stud through the pilot hole. The punch is then threaded onto the tip of the draw stud and brought close to the sheet