Tork Craft | 4 Flute Wood Boring Bit 19 X 400mm Veritas_Accessory Guide plate: 160 x 327mm

Guide plate: 160 x 327mm

or grab a piece of scrap material before diving into your DIY project

1/2" Universal Joint

Perfect for a high material removal rate and fine finish

Please note that these T-Nuts will not work on the imperial USA T-Tracks from Incra

Tork Craft | 4 Flute Wood Boring Bit 19 X 400mm Veritas_Accessory Guide plate: 160 x 327mmDiameter: 19,0mmOverall length: 400mmShank: 6,35mm hex for quick change Use the 4 flute boring bit to drill into wood timber. A low rpm rotary drill with a planetary gearbox is required to be used with boring bits. It is possible to use a cordless drill, but in its lowest gear. The drill spurs have 4 cutting edges that leaves a cleaner and more precise bored hole Using the same designed screw tip as from an auger drill bit the 4 flute boring bit feeds