Tork Craft | Drill Bit HSS Standard 8,0mm 1/Card Type_Band Clamps Sizes: E10

Sizes: E10

14 x 15mm Hinged Socket Wrench

7 kPa of Max sealed suction / 50 W of Suction power and long run time to go together

the Mortise Chisel Adaptor is configured so that the angle registration jig will yield the correct bevel angle in the 30° to 35° range typical of mortise chisels

Four devices in one: Smaller pad

Tork Craft | Drill Bit HSS Standard 8,0mm 1/Card Type_Band Clamps Sizes: E10Drill Bit The drill bit is made from HSS (hi speed steel) and is roll forged. Standard HSS 118 angle point drill bits are designed as an all purpose drill bit and it will drill into steel, non ferrous metals and plastic. Sharpening The drill bits are re sharpenable several times. We recommend the following machines to sharpen the HSS standard drill bits: Drill Doctor 360X Diameter range of 2,5mm 13mm Drill Doctor 500X Diameter range of 2,4mm 13mm