Tork Craft | Glass & Tile Drill 4mm Einhell_Bench Grinder Recipro Saw JR3061T

Recipro Saw JR3061T

heat treated up to 60 HRc

The carbon brushes are held in with springs which should come out easily or with careful prying with the screwdriver if needed

Holds narrow workpieces in place for precise and repeatable mortise placement

Thinners: Thinners 1000/Methylated Spirit*

Tork Craft | Glass & Tile Drill 4mm Einhell_Bench Grinder Recipro Saw JR3061T4mm Glass & Tile Drill Bit Size: 4mm Qty: 1 For precision drilling in glass, mirrors, ceramic and marble tiles. If the tile is on the wall, use a masonry bit to finish the hole once through the tile. If the tile is on the wall use a masonry bit to finish the hole once through the tile. If drilling into extremely hard floor tiles or granite, choose the Tork Craft Diamond drill, TC1808 series for better results. Use slow speeds. For precision drilling