Tork Craft | Drill Bit HSS Standard 6,8mm 1/Card Type_Welding Rods 2006 and T-7 Wet Sharpening

2006 and T-7 Wet Sharpening Machines

BS:EN71 Part 3

or K5 Kreg Jig® Benchtop Base for upright drilling

000bpm Impact rate (1st level) 0-2

jammed car bulbs

Tork Craft | Drill Bit HSS Standard 6,8mm 1/Card Type_Welding Rods 2006 and T-7 Wet SharpeningThe drill bit is made from HSS (hi speed steel) and is roll forged. Standard HSS 118 angle point drill bits are designed as an all purpose drill bit and it will drill into steel, non ferrous metals and plastic. Sharpening The drill bits are re sharpenable several times. We recommend the following machines to sharpen the HSS standard drill bits: Drill Doctor 360X Diameter range of 2,5mm 13mm Drill Doctor 500X Diameter range of 2,4mm 13mm (19mm