Pull Out And Turning Handle for Sectional Steel Rods Size:5/16" Once you get to the

Once you get to the correct level to enter the pipe just lift the rope and the bridge slowly becomes horizontal so you can lift it and slide it into place in the line

This 90º 4-pronged rake is made to grab roots and debris in sewers and Storm drains

Good for 10-20 gpm and 800 to 2000 psi operating pressure

Note: Grit Catchers sizes 18" and 24" are nonrefundable

- 5" Diameter

Pull Out And Turning Handle for Sectional Steel Rods Size:5/16" Once you get to theThis tool you can use to push, pull or turn the rods. You can slide this tool right over the rod and it will slip over the coupling to allow you to push or pull the sectional rods. Insert the pin through the center hole of the coupling and you can turn the rods too. This is done with hand rodding. Pick for either your 5 16 or 3 8 rods. Made of steel and zinc plated.