Pro-Tools Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (1-1/8" OD 4-1/2" CLR) Project Blocks Special Order Item - Delivery

Special Order Item - Delivery Approx 3-4 Weeks

This Panel Bit with Back Cutter allows you to cut the Front Reveal and the optional Back Cut at the same time while guaranteeing a 1/4” tongue in the process

The jig supports the drawer slide level and straight while you install it in the cabinet

Ground Cable

This bit is typically used at the corners of casework this bit cuts both halves of the joint

Pro-Tools Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (1-1/8" OD 4-1/2" CLR) Project Blocks Special Order Item - DeliverySpecs Outside Diameter of the Tubing (OD): 1 1 8" (28. 6 mm) Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 1 2 (114. 3 mm) Maximum