Tam Valley Depot TURT01 Turtle Stall Motor Decoder Roadname_L&N Another strategy is to use

Another strategy is to use a DPDT toggle to throw your turnout motors

Alternately flashes two 1

That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions

but the boilers were 10 inches larger in diameter and they had larger cylinders as well

Each bridge superstructure features detailed lattice work inside

Tam Valley Depot TURT01 Turtle Stall Motor Decoder Roadname_L&N Another strategy is to useTam Valley Depot TURT01 Turtle Stall Motor Decoder This item includes board and mounting kit. For local control you will also need a Fascia Controller (see below). For connecting to a motor the options are to use the jumper wires below, your own wires soldered to the output pins, or a servo extension cable. The MP1 motor requires a 3 wire connection so the servo cable is a good option. The jumper wires connect directly to the the M1 and M2 output pins