2" x 1/2" With 1/4" Radius Corner Roller 540ACR4 Spray Adhesives / Glue or up to 50 times

or up to 50 times PEL with full facepiece respirators when quantitatively fit-tested

polyester and vinylester or other resins that cure and/or catalyze at higher temperatures

Dry film thickness must be at least 2 - 4 mils on new or reconditioned molds and 1 - 2 mils on seasoned molds (2 mils is the approximate thickness of an industrial-type trash bag)

50" Wide This 2x2 twill weave fabric offers the cosmetic appearance so desirable on modern composite parts

it is important that it is thoroughly mixed and "wet out

2" x 1/2" With 1/4" Radius Corner Roller 540ACR4 Spray Adhesives / Glue or up to 50 timesAluminum Corner Roller With Plastic Handle . 540ACR4 Designed for concave surfaces and filets where flat rollers are not efective. All radius and corner rollers come with strong steel frames and ferrule reinforced handle. Deep fins for fast air release. All corner rollers accept extensions handles. All corner rollers are machined with the deepest fins possible for an afficent air relief and exellent lay up properties.