MTM Replacement Orifice Foam Cannon Nozzle 1.25mm - 3.5 POLISHING - TOOLS / ACCESSORIES - Wet Sanding - EXTERIOR - PAINT PREP - Paint Chip Repair All three pads are made

All three pads are made from open cell foam materials to provide a smooth and comfortable polishing experience while minimising excessive heat build-up

This gun is rated up to 4

Standard wax with 30% Vol

A little goes a long way

Equivalent to 3000 grit sandpaper with out the dulling of paint and sanding haze

MTM Replacement Orifice Foam Cannon Nozzle 1.25mm - 3.5 POLISHING - TOOLS / ACCESSORIES - Wet Sanding - EXTERIOR - PAINT PREP - Paint Chip Repair All three pads are madeMTM Replacement Orifice Foam Cannon Nozzle 1. 25mm 3. 5 These orifices are meant to allow for higher or lower flow machines. They will more accurately accommodate a machine requiring a larger orifice which is estimated in the ranges of flow exceeding 4 gallons per minute. The purpose of a larger orifice is to allow more water to pass through which decreases restriction and may eliminate pulsation of your machine.